Lessons Learned from Years with

A Manual for Working with Peek Tubing

Notably, because of the outstanding properties and versatility of peek tubing, various industries from healthcare to aerospace are utilizing it. Among the properties of peek (polyether Ether Ketone) that is ideal is that is has chemical, mechanical and thermal resistance. Being a beginner, there is a lot that you need to learn about peek tubing. click here for more on tubing, view here!

The first type of extruded peek tubing. This type of tubing is manufactured through forcing molten peek material through a die. As a result, it forms a continuous tube with the same diameter all through. It is important for you to know that extruded tube peeking are in a variety of sizes, thickness and lengths. For reinforced peek tubing, peek is combing with other materials including carbon and glass fibers, view here for more.

Heat shrink tubing is another type to know. When heat is exposed to the diameter it shrinks. Because the diameter has tightly sealed the object, then it means that it will not be susceptible to mechanical damage, chemicals and moisture. Bear in mind that peek tubing is often opaque, however, colored peek tubing happens when pigments are added in the manufacturing process, check it out! With this, it will be easy to notice the tubing in compound systems. When working with a small space, it would be best to use coiled tubing.

There also is the multi-lumen peek tubing which multiple inner channels within an outer tube. It is a tubing that is best for transporting different fluids separately in a system. The last type of tubing is the heat exchanger peek tubing which are best suited for heat exchange systems because of its high thermal conductivity.

One of the advantages of peek tubing is that it can withstand high temperature thus cannot damage its mechanical properties. Peek tubing is beneficial to the healthcare industry as it is biocompatible. Notably, peek tubing has adhered to the standards of the Food and Drug Administration making it safe for use, read more. Peek tubing is ideal for the automotive and aerospace industry because it is lighter, this service.

You need to be careful when using materials in peek tubing for you to obtain the best results. here, using a sharp blade when cutting the tubing is necessary to ensure that you get straight cuts, read more now. To ensure that there is nothing hindering the fluid flow, it is necessary that you deburr the ages after cutting. Even with its flexible property ensure not to bend the tubing as this will also hinder the fluid flow. Working with peek tubing has been made easier from the information in this site.

Suggested Article: click to read